Complete Underground Technologies
 

Swivel Eye Grips

Constructed with a solid steel rotating eye and high grade galvanized cable, Triple D's Swivel Eye Grips provide contractors with a strong, long wearing grip that is easy to load and unload. These grips are engineered for pulling underground pipe, duct and
primary and secondary cables.

The rotating eye is not a ball bearing type swivel and will not turn under pulling tension. It will only turn to releive pulling rorque when the pulling tension is released. If a constant swivel action is needed during a pull, use a properly sized ball bearing swivel ahead of the grip.

swivel eye mesh grips
model no. weave grip range mesh length working load tensile strength
S 75-99 Double .75" - .99" 20" 2,200 lbs. 6,800 lbs
S 100-124 Double 1.00" - 1.24" 20" 4,400 lbs. 12,800 lbs.
S 125-149 Double 1.25" - 1.49" 24" 4,400 lbs. 12,800 lbs.
S 150-199 Double 1.50" - 1.99" 25" 5,500 lbs. 16,400 lbs.
S 200-249 Double 2.00" - 2.49" 26" 9,000 lbs. 27,200 lbs.
S 250-299 Double 2.50" - 2.99" 28" 11,000 lbs 33,000 lbs.
S 300-349 Double

3.00" - 3.49"

30" 13,600 lbs. 41,000 lbs.
S 350-399 Double 3.50" - 3.99" 32" 16,000 lbs. 48,000 lbs.
S 400-449 Double 4.00" - 4.49" 33" 16,000 lbs. 48,000 lbs.

 

Pulling Grips

Pulling grips are fabricated of Hi-Fatigue Aircraft Strand plastic coated steel cable. Continuous fabrication of grip from receiving end through entire mesh, including eye, provides a flexible stress relieving pulling eye. All strands are plastic coated, which increases the life of the grip, provides a bearing surface on underground pulls, and increases the ease and safety of installation and removal for workmen.

Model No. Nominal Grip Range* Weave Working Load
A20-SW 3/4" - 1 1/4" Single 1,000 lbs.
A20 3/4" - 1 1/4" Double 2,000 lbs.
B24 1 1/4" - 2" Triple 2,500 lbs.
C26 2" - 2 3/4" Triple 3,500 lbs.
D38 2 3/4" - 3 1/2" Triple 4,500 lbs.
E46 3 1/2" - 4 1/4" Triple 5,500 lbs.
F52 4 1/4" - 4 7/8" Triple 6,000 lbs.
* Without Maxi-Grip nose cone.
Note: When used without a Losst Motion device and trailing bullet, the service life is significantly reduced.

 

Attachment Hardware

Load Rated Screw Pin Anchor Shackles

Quick-Links

Load rated screw pin anchor shackels
Model No. Body Size Pin Size Working load
AS-312 5/16" 3/8" 1,500 lbs.
AS-375 3/8" 7/16" 2,000 lbs.
AS-438 7/16" 1/2" 3,000 lbs.
AS-500 1/2" 5/8" 4,000 lbs.
AS-625 5/8" 3/4" 6,500 lbs.
AS-750 3/4" 7/8" 9,500 lbs.
AS-875 7/8" 1" 13,000 lbs.
AS-100 1" 1" - 1/8" 17,000 lbs.
Quick-links
Model No. Size
9N 5/16"
10N 3/8"
12N 1/2"
 
© 2006-
Warning: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone. in /var/www/vhosts/triplednj.com/httpdocs/bot.php on line 14
2018 Triple D Enterprises, Inc. All rights reserved.