Complete Underground Technologies
 

Wing Reamers

Fabricated from heat treated alloy steel for strength and durability, these Winged Backreamers are available with a built-in drawbar, pin or box rear connection. The API REG box fronts will accept any API pin crossover needed to attach to your drill.



WINGED REAMER -- API REG. (B) X DRAWBAR
with SHARK TEETH
Item No. NOMINAL
DIA.
ACTUAL
DIA.
DESCRIPTION
260001010 10.0" 10.75" WINGED W/ 2.375" API REG (B)
260001012 12.0" 12.75" WINGED W/ 2.375" API REG (B)
260001014 14.0" 14.75" WINGED W/ 2.375" API REG (B)
260001016 16.0" 16.75" WINGED W/ 2.375" API REG (B)
260001018 18.0" 18.75" WINGED W/ 2.375" API REG (B)
260001020 20.0" 20.75" WINGED W/ 2.875" API REG (B)
260001022 22.0" 22.75" WINGED W/ 2.875" API REG (B)
260001024 24.0" 24.75" WINGED W/ 2.875" API REG (B)
260001026 26.0" 26.75" WINGED W/ 2.875" API REG (B)
260001028 28.0" 28.75" WINGED W/ 2.875" API REG (B)
260001030 30.0" 30.75" WINGED W/ 3.5" API REG (B)
260001032 32.0" 32.75" WINGED W/ 3.5" API REG (B)
260001034 34.0" 34.75" WINGED W/ 3.5" API REG (B)
260001036 36.0" 36.75" WINGED W/ 3.5" API REG (B)

Additional sizes and configurations available upon request.

Note: A "spider" center support is used in 18" and larger reamers.



REPLACEMENT CARBIDE CUTTERS
Item No. Description
250080100 #1 ST, Small Shark Tooth - 1.250" ht.
250080200 #2 ST, Medium Shark Tooth - 1.500" ht.
250080300 #3 ST, Large Shark Tooth - 2.160" ht.
250090100 #1 C, Small Conical Tooth - 0.84" ht.
250090200 #2 C, Medium Conical Tooth - 1.26" ht.
250090300 #3 C, Large Conical Tooth - 1.60" ht.
 
© 2006-
Warning: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone. in /var/www/vhosts/triplednj.com/httpdocs/bot.php on line 14
2018 Triple D Enterprises, Inc. All rights reserved.