Complete Underground Technologies
 

Tapered Barrel Backreamers

Tapered barrel reamers feature shark teeth carbide cutters in a spiral pattern, and a "packer" barrel rear for stability. Reamers have API REG box fronts and are available with a drawbar, pin or box rear connection. The API REG box fronts will accept any API pin crossover needed to attach to your drill.

TAPERED BARREL REAMER -- API REG. (B) X DRAWBAR
WITH SHARK TEETH
Item No. CUT
DIA.
PACK
DIA.
DESCRIPTION
280001006 6.0" 4.5" TAPER BARREL W/ 2.375" API REG (B)
280001008 8.0" 5.6" TAPER BARREL W/ 2.375" API REG (B)
280001010 10.0" 6.6" TAPER BARREL W/ 2.375" API REG (B)
280001012 12.0" 8.6" TAPER BARREL W/ 2.375" API REG (B)
280001014 14.0" 10.8" TAPER BARREL W/ 2.375" API REG (B)
280001016 16.0" 12.8" TAPER BARREL W/ 2.375" API REG (B)
280001018 18.0" 14.0" TAPER BARREL W/ 2.375" API REG (B)
280001020 20.0" 16.0" TAPER BARREL W/ 2.875" API REG (B)
280001024 24.0" 20.0" TAPER BARREL W/ 2.875" API REG (B)
280001028 28.0" 24.0" TAPER BARREL W/ 3.500" API REG (B)


REPLACEMENT CARBIDE CUTTERS
Item No. Description
250080100 #1 ST, Small Shark Tooth - 1.250" ht.
250080200 #2 ST, Medium Shark Tooth - 1.500" ht.
250080300 #3 ST, Large Shark Tooth - 2.160" ht.
250090100 #1 C, Small Conical Tooth - 0.84" ht.
250090200 #2 C, Medium Conical Tooth - 1.26" ht.
250090300 #3 C, Large Conical Tooth - 1.60" ht.


 
 
© 2006-
Warning: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone. in /var/www/vhosts/triplednj.com/httpdocs/bot.php on line 14
2018 Triple D Enterprises, Inc. All rights reserved.