Wing Reamers
Fabricated from heat treated alloy steel for strength and durability, these Winged Backreamers are available with a built-in drawbar, pin or box rear connection. The API REG box fronts will accept any API pin crossover needed to attach to your drill.
| WINGED REAMER — API REG. (B) X DRAWBAR WITH SHARK TEETH |
|||
| ITEM NO. | NOMINAL DIA. |
ACTUAL DIA. |
DESCRIPTION |
| 260001010 | 10.0″ | 10.75″ | WINGED W/ 2.375″ API REG (B) |
| 260001012 | 12.0″ | 12.75″ | WINGED W/ 2.375″ API REG (B) |
| 260001014 | 14.0″ | 14.75″ | WINGED W/ 2.375″ API REG (B) |
| 260001016 | 16.0″ | 16.75″ | WINGED W/ 2.375″ API REG (B) |
| 260001018 | 18.0″ | 18.75″ | WINGED W/ 2.375″ API REG (B) |
| 260001020 | 20.0″ | 20.75″ | WINGED W/ 2.875″ API REG (B) |
| 260001022 | 22.0″ | 22.75″ | WINGED W/ 2.875″ API REG (B) |
| 260001024 | 24.0″ | 24.75″ | WINGED W/ 2.875″ API REG (B) |
| 260001026 | 26.0″ | 26.75″ | WINGED W/ 2.875″ API REG (B) |
| 260001028 | 28.0″ | 28.75″ | WINGED W/ 2.875″ API REG (B) |
| 260001030 | 30.0″ | 30.75″ | WINGED W/ 3.5″ API REG (B) |
| 260001032 | 32.0″ | 32.75″ | WINGED W/ 3.5″ API REG (B) |
| 260001034 | 34.0″ | 34.75″ | WINGED W/ 3.5″ API REG (B) |
| 260001036 | 36.0″ | 36.75″ | WINGED W/ 3.5″ API REG (B) |
Additional sizes and configurations available upon request.
Note: A “spider” center support is used in 18″ and larger reamers.
| REPLACEMENT CARBIDE CUTTERS | |
| ITEM NO. | DESCRIPTION |
| 250080100 | #1 ST, Small Shark Tooth – 1.250″ Ht. |
| 250080200 | #2 ST, Medium Shark Tooth – 1.500″ Ht. |
| 250080300 | #3 ST, Large Shark Tooth – 2.160″ Ht. |
| 250090100 | #1 C, Small Conical Tooth – 0.84″ Ht. |
| 250090200 | #2 C, Medium Conical Tooth – 1.26″ Ht. |
| 250090300 | #3 C, Large Conical Tooth – 1.60″ Ht. |